基于卡爾曼濾波的鋰離子蓄電池組SOC估算方法研究
上傳時間:2015/7/25 11:06:10
摘要:針對電動汽車鋰離子蓄電池組SOC估算精度問題,采用卡爾曼濾波算法進行估算。建立電池組的狀態空間模型,根據實際工況進行模型參數辨識,并實時校正電池組實際容量和庫倫效率,通過仿真驗證此模型的可行性和精度。仿真結果表明,該方法能夠?qū)崟r(shí)估算電池組SOC,最大誤差僅為1.8%。卡爾曼濾波算法能夠大大提高電池組SOC估算精度,通過改進此算法將能夠適應電動汽車復雜行駛工況的安全保障要求。
敘詞:電動汽車 剩余電量 卡爾曼濾波 鋰離子蓄電池組
Abstract:Using Kalman filter to estimate Lithium-ion battery pack SOC, aiming to improve the SOC estimation accuracy. Establishing the state space model for the battery pack, according to the actual working conditions to identify model parameters, correcting the battery pack actual capacity and coulombic efficiency in real time, and verifying the feasibility and accuracy of the model through the simulation. The simulation results show that this method can estimate battery pack SOC in real time, and the maximum error is only 1.8%.Kalman filter can greatly improve the battery pack SOC estimation precision, and improving Kalman filter will be able to adapt to the requirements of electric vehicle complex running conditions and security.
Keyword:Electric vehicle, SOC, Kalman filter, Lithium-ion battery pack
說明:本站會員正確輸入用戶名和密碼進行登錄系統后才能查看文章詳細內容和參與評論。
--本文摘自《電源世界》,已被閱讀8422次
免責聲明:本文僅代表作者個人觀點,與電源在線網無關。其原創性以及文中陳述文字和內容未經本站證實,對本文以及其中全部或者部分內容、文字的真實性、完整性、及時性本站不作任何保證或承諾,請讀者僅作參考,并請自行核實相關內容。
↑上一篇:第8講 電解電容器基礎知識(三)——一般用途電解電容器(續1) ↓下一篇:適用于混合動力汽車的DC/DC變換器低損耗控制方法
打印本頁 關閉本頁
打印本頁 關閉本頁
關于本文的網友評論:
本文暫時還沒有網友發表評論信息!