您的位置：電源在線首頁>>產品中心>>電源產品分類>>模塊電源(DC/DC)>>MINMAX模塊電源MAU102MAU106MAU108MAU109產品詳情

MINMAX模塊電源MAU102MAU106MAU108MAU109

公司名稱：珠海市慧龍達通信設備有限公司
所屬類別：電源產品分類>>模塊電源(DC/DC)
電子信箱：mldzcx@tom.com
聯系電話：0756-2219836 2219236
聯 系人：李先生
更新時間：2010-6-3 11:56:12

產品詳情

Download the PDFs

1W, Miniature SIP, Single & Dual Output DC/DC Converters

Key Features

‧Efficiency up to 81%

‧1000VDC Isolation

‧MTBF > 2,000,000 Hours

‧Low Cost

‧Input 5, 12, 15 and 24VDC

‧Output 3.3,5,9,12,15,±5,±9,±12 and ±15VDC

‧Temperature Performance -40°C to +85°C

‧UL 94V-0 Package Material

‧Internal SMD Construction

‧Industry Standard Pinout

Selection Guide

Model Number	Input Voltage	Output Voltage	Output Current	Efficiency	Load Regulation
Model Number	VDC	VDC	mA	% Typ.	% Max.
MAU101	5 ( 4.5 – 5.5 )	3.3	260	73	10
MAU102		5	200	71	10
MAU103		9	110	76	8
MAU104		12	84	78	7
MAU105		15	67	78	7
MAU106		±5	±100	72	10
MAU107		±9	±56	77	8
MAU108		±12	±42	78	7
MAU109		±15	±34	79	7
MAU111	12 ( 10.8 – 13.2 )	3.3	260	74	8
MAU112		5	200	73	8
MAU113		9	110	78	5
MAU114		12	84	80	5
MAU115		15	67	80	5
MAU116		±5	±100	74	8
MAU117		±9	±56	79	5
MAU118		±12	±42	81	5
MAU119		±15	±34	81	5
MAU121	24 ( 21.6 – 26.4 )	3.3	260	73	8
MAU122		5	200	71	8
MAU123		9	110	76	5
MAU124		12	84	78	5
MAU125		15	67	79	5
MAU126		±5	±100	72	8
MAU127		±9	±56	76	5
MAU128		±12	±42	79	5
MAU129		±15	±34	80	5
MAU151	15 ( 13.5 – 16.5 )	5	200	72	8
MAU152		12	84	79	5
MAU153		15	67	79	5
MAU154		±5	±100	72	8
MAU155		±12	±42	80	5
MAU156		±15	±34	80	5

Minmax' s MAU100 1W DC/DC's
are specially designed to provide
the optimum cost/benefit power
solution in a miniature SIP package.

The series consists of 33 models
with input voltages of 5V, 12V, 15V
and 24VDC which offers standard
output voltages of 3.3V, 5V, 9V, 12V,
15V, ±5V, ±9V, ±12V and ±15VDC
for a wide choice.

The MAU100 series is an excellent
selection for a variety of applications
including distributed power systems,
mixed analog/digital subsystems,
portable test equipments, local power
networks and battery backed systems.

Mechanical Dimensions

Pin Connections

Pin	Singles	Duals
1	+Vin	+Vin
2	-Vin	-Vin
4	-Vout	-Vout
5	No Pin	Common
6	+Vout	+Vout


Case Size –
5V & 12V Input – 19.5x6.1x10.2mm
	(0.77x0.24x0.40inch)
15V & 24V Input –19.5x7.1x10.2mm
	(0.77x0.28x0.40inch)
Case Material – Non-Conductive Black Plastic
Weight –
5V & 12V Input – 2.2g (0.08Oz)
15V & 24V Input– 2.6g (0.09Oz)

Tolerance	Millimeters	Inches
	X.X±0.25	X.XX±0.01
	X.XX±0.13	X.XXX±0.005
Pin	±0.05	±0.002

T= 6.1 (0.24) for 5V & 12V Input Models

T= 7.1 (0.28) for 15V & 24V Input Models

Absolute Maximum Ratings
Parameter		Min.	Max	Units
Input Surge Voltage (1000mS)	5VDC Input Models	-0.7	9	VDC
	12VDC Input Models	-0.7	18	VDC
	15VDC Input Models	-0.7	18	VDC
	24VDC Input Models	-0.7	30	VDC
Lead Temperature (1.5mm from case for 10sec.)		---	260	°C
Internal Power Dissipation		---	450	mW

Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings.

General Characteristics
Parameter	Conditions	Min.	Typ.	Max.	Units
Isolation Voltage	60 Seconds	1000	---	---	VDC
Isolation Resistance	500VDC	1000	---	---	MΩ
Isolation Capacitance	100kHz, 1V	---	60	100	pF
Switching Frequency		70	100	120	kHz
MTBF	MIL-HDBK-217F @25°C Ground Benign	2	---	---	MHrs

Environmental Characteristics
Parameter	Conditions	Min.	Max.	Units
Operating Temperature	Ambient	-40	+85	°C
Operating Temperature	Case	-40	+90	°C
Storage Temperature		-40	+125	°C
Humidity		---	95	%
Cooling	Free-Air Convection

Output Characteristics
Parameter	Conditions	Min.	Typ.	Max	Units
Line Regulation	For Vin Change of 1%	---	±1.2	±1.5	%
Load Regulation	Io = 20% to 100%	See Selection Guide			%
Ripple & Noise	20MHz BW	---	50	75	mV P-P
Short Circuit	0.5 Second Max.

Maximum Capacitive Load
Models by Output Voltage (Each Output on Duals)	Singles	Duals	Units
Models by Output Voltage (Each Output on Duals)	220	100	uF

Derating Curve (3.3, 5 & ±5V Outputs)

Derating Curve (Other Outputs)

Notes :

1.	Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted.
2.	These power converters require a minimum output load to maintain specified regulation.
3.	Operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed.
4.	All DC/DC converters should be externally fused at the front end for protection.
5.	Other input and output voltage may be available, please contact factory.
6.	All specifications subject to change without notice.

關于該條產品信息，我有如下留言：

免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責。電源在線對此不承擔任何保證責任。

欧美午夜精品理论片a级按摩,亚洲视频免费观看,欧美特黄一级,中文字幕一区二区av

電源在線/www.mangadaku.com

中國領先的電源行業商務平臺

MINMAX模塊電源MAU102MAU106MAU108MAU109

產品搜索

企業商柜

產品新聞

企業產品庫

相關產品